Monitors Receivers and Guidance

MOBILE RTK

• Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
• Allows you to use RTK precision in difficult areas such as hilly terrain because there is no line-of-sight requirement to the base station.
• No need to manually switch base stations as you move between fields you can roam anywhere within the network and have access to the RTK correction signal.
• Requires a StarFire 6000 receiver, SF3 Ready Activation, RTK Ready Activation
• Requires John Deere Mobile RTK subscription

RTK RADIO 450

• Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
• Use a Dealer-owned RTK network to reduce your administrative expenses
• Provides less chance of radio interference, and RTK Extend to minimize shading signal loss
• Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation
• Requires RTK subscription provided by your John Deere dealer or your own base station

RTK RADIO 900

• Provides +/- 1 inch pass-to-pass accuracy season after season, and year after year
• Use a Dealer-owned RTK network to reduce your administrative expenses
• Provides less chance of radio interference, and RTK Extend to minimize shading signal loss
• Requires a StarFire 6000 receiver, SF3 Ready Activation, and RTK Ready Activation
• Requires RTK subscription provided by your John Deere dealer or your own base station

STARFIRE 7500 RECEIVER

• RTK-like accuracy 2.5 cm pass to pass accuracy
• SF-RTK achieves 73% faster pull-in times¹, compared to SF3 signal
• Long-term repeatability, season to season
• Drop-in replacement for StarFire 6000 Receiver

ITEC PRO

• Increased machine automation allows operator to focus their attention on the quality of the job.
• Improves productivity through consistent, repeated optimized end turns across a field.

G5 PLUS UNIVERSAL DISPLAY

• Our largest display ever 12.8-inch touchscreen with 1080p HD resolution
• 3x faster processor than previous models, for quicker cold boot times
• Permanent AutoTrac and Section Control license comes standard
• AutoTrac RowSense permanent license available
• Also available with optional 1- or 3-year G5 Advanced license to add even more precision and automation capabilities

4200 SECTION CONTROL ACTIVATION

• Reduce overlap and minimize skips ensuring precise placement of crop protectants and nutrients
• Reduce product overlap by approximately 4.3 percent
• Improve performance with tuning, plant-to-row, and boundary features
• Reduce operator fatigue so they can stay in the field longer

*Based on independent university study of results with and without Section Control.

Results will vary based on conditions, planter size and type.

4200 COMMAND CENTER DISPLAY

• Available factory-installed on 6R, 7-210R and 7-230R Tractors
• Comes with documentation in base price
• Easily add and change features as your needs change
• Permanent, non-transferable AutoTrac activation optional

4240 AUTOTRAC ACTIVATION

• Accurate placement of inputs
• Increases productivity by increased AutoTrac usage in subsequent cropping passes
• Decrease crop damage in subsequent cropping practices
• Higher accuracy of placement of inputs improving crop potential

4240 UNIVERSAL DISPLAY

• An affordable and portable way to put precision ag to work for you
• 8.4-inch touchscreen provides easy-to-use experience
• High-contrast screen allows you to see your display in bright sunlight, even on open station tractors
• Basic documentation and AutoTrac come standard

4640 UNIVERSAL DISPLAY

• Improved operating experience for older John Deere tractors and mixed fleets
• Enhanced data merging capabilities deliver more on-board and off-board flexibility
• Improved data capture and collection capabilities providing more accurate Section Control performance and documentation
• Precisely apply multiple products simultaneously with individual coverage maps and application points

ACTIVE FILL CONTROL

• Automated trailer and truck filling
• Reduce operator stress and fatigue
• Improve harvest efficiency
• Harvest day and night

ACTIVE IMPLEMENT GUIDANCE

• Accurate placement of inputs
• Increases productivity by increased AutoTrac usage in subsequent cropping passes.
• Decrease crop damage in subsequent cropping practices
• Higher accuracy of placement of inputs improving crop potential.

AUTOPATH

• Use data from the first pass, either strip-till or planting, to automatically create full-field guidance lines for secondary passes such as planting, spraying, and harvest
• Setup time for secondary operations is faster and crop damage is reduced as guidance is based on actual planted crop rows
• Know which rows to start on, regardless of equipment width, even in down crops
• Available as part of the Automation 4.0 Package and Advanced License.

AUTO TRAC UNIVERSAL 300

• Automated setup. Simply press the calibrate button, drive a few hundred feet and the software calculates the right settings for your equipment
• Smaller and quieter with a more comfortable steering wheel
• Dust and moisture resistant for use with an open station tractor

AUTO TRAC CONTROLLER 300 STEERING KIT

• Focus more on job quality and less on steering
• Keep original operator station ergonomics with a truly integrated experience
• Reduce skips and overlaps even on machines without factory installed AutoTrac
• Available on a wide variety of tractors, from utility tractors to articulated 4-wheel drives
• Choose the level of accuracy that fits your needs SF1, SF3, or RTK

AUTO TRAC CONTROLLER

Realize the benefits of AutoTrac on Non-Deere machines.

• Make long days easier with equipment and technology that works together for you.
• Increase productivity by being able to cover more ground.
• Reduce overlap and maximize inputs.
• Reduce fatigue and improve operator experience

AUTO TRAC VISION

• Decrease crop damage, reduce operator fatigue, and operate at higher speeds compared to manual driving by enabling the equipment to follow the actual planted crop row.

GEN 4 COMMANDCENTER AUTOMATION ACTIVATION

• Use data from planting or strip till and planting to automatically create full-field guidance lines for secondary passes
• Let AutoTrac Turn Automation take over your turns, implement functions, and speed
• Crush harvest chaos through combine and grain cart controls with Machine Sync
• AutoTrac Implement Guidance places your tool exactly where it needs to be, even on sidehills and around curves

G5 COMMANDCENTER

• Optional factory-installed on select 2024 and later models with CommandCenter controls
• 3x faster processor than previous models, for quicker cold boot times
• Large, 10.1-inch touchscreen with 1080p HD resolution 35% larger than previous models
• Base includes Data Sync, Documentation, Over-the-Air Updates, and Remote Display Access

G5 UNIVERSAL DISPLAY

• Large, 10.1-inch touchscreen 35% larger than previous models
• 3x faster processor than previous models, for quicker cold boot times
• Brighter, clearer 1080p HD resolution
• Permanent AutoTrac, Section Control, and AutoTrac, RowSense license available

G5 ADVANCED PACKAGE

• Add even more precision and automation to your G5 Display
• Bundles advanced precision ag tools into one easily renewable license
• Set up for easy adoption of future autonomous technologies
• Improve ease and accuracy of every pass by choosing the package tailored to your machine
• Choose from either 1- or 3-year license options

G5 PLUS EXTENDED MONITOR

• Additional screen space to give you an even bigger view of important machine and field information
• Large, 12.8-inch touchscreen monitor with 1080p HD resolution
• Reduces the need to swipe between multiple run pages, making it faster and easier to adjust and monitor machines and implements

G5 PLUS COMMANDCENTER

• Optional factory-installed on select 2024 and later models with CommandCenter controls
• Our largest display ever 12.8-inch touchscreen with 1080p HD resolution
• 3x faster processor than previous models, for quicker cold boot times
• Base includes AutoTracTM, Section Control, Data Sync, Documentation, Over-the-Air Updates and Remote Display Access

GEN 4 EXTENDED MONITOR

• Monitor quality of the work being done in broad acre, high speed operations by seeing a second full page run screen on a second interactive touch screen monitor.
• Easily make machine or implement setting adjustments by reducing the need to swipe between multiple run pages.