625D Draper Self-Propelled Windrowers from John Deere. Learn more about the features, specifications, and more for the 625D Draper Self-Propelled Windrowers.
- Windrowing capability with 600D Drapers
- Double-cut knife system produces a cleaner cut
- Dual-knife drive system is timed
- Cutterbar is closer to the ground
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Draper Platforms
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Cutterbar: | |
|---|---|
| Type | Straight line knife drive system |
| Length | 7.8 m 25.5 ft |
| Knife drive | Base single, optional dual knife (combine use only) Base dual knife (SPW only or SPW/combine combination use) |
| Knife speed | 490 cycles/min 1,040 spm |
| Cutterbar tilt | Base Hydraulic, 9 degrees tilt maximum |
| Pickup reel: | |
| Number of slats | 6 bat poly base 8 bat steel optional (for forage conditions) |
| Fingers | Nylon (steel optional, typically used in rice or forage conditions) |
| Diameter | 1,067 mm 42 in. For rice or forage conditions 1,371 mm 54 in. |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Reel lift | Cylinder stroke 330 mm 13 in. Total range 391.5 mm 15.4 in. |
| Reel fore and aft | Cylinder stroke 359 mm 14.1 in. Total range 620 mm 24.4 in. |
| Reel resume | Base |
| Reel reverse | Base |
| Operating speeds | 6-54 rpm |
| Operating speeds (54-in. reel) | 5-44 rpm |
| Slat reel: | |
| Number of slats | |
| Diameter | |
| Height control | |
| Speed control | |
| Operating speeds | |
| Draper belts: | |
| Width | 0.7 L 24 oz rubber coated polyester with V-Guide tracking Side belts 1,016 mm 40 in. Center belts 1,397 mm 55 in. Center belt not included with SPW configuration |
| Clean height | 25.4 mm 1 in. |
| Operating speed | Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration |
| Speed control | Hydraulic from cab |
| Center belt reverse | Base; Center belt not included with SPW configuration |
| Feed drum: | |
| Diameter | 406 mm 16 in. Feed drum not included with SPW configuration |
| Feed drum fingers | Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer |
| Number of fingers | 18 |
| Auger finger platform | Dual chevron, retracting |
| Finger reach | 152 mm 6 in. |
| Drum/auger reverse | Base |
| Operating speed | 195 rpm |
| Center clean out door | Base |
| Header height sensing: | |
| Type | Electro-hydraulic base |
| Header height sensing on the ground | Base |
| Header height sensing off the ground | |
| Auxiliary top auger: | |
| Type | Optional hydraulic drive |
| Dimensions: | |
| Platform length | 8.5 m 27.9 ft |
| Overall operating depth | 2.4 m 7.9 ft |
| Transport width, field position | 8.1 m 26.5 ft |
| Transport width on wheel, less dividers | |
| Transport length, hitch extended | |
| Weight: | |
| Approximate weight (slat reel) | |
| Approximate weight (pickup reel) | Combine only 2,884 kg 6,359 lb SPW only 2,284 kg 5,036 lb |
| Approximate weight (with transport) | |
| Approximate weight (optional 54-in. reel) | Combine only 2,974 kg 6,556 lb SPW only 2,374 kg 5,234 lb |
| Additional information: | |
| Date collected |