2730 Combination Ripper Primary Tillage from John Deere. Learn more about the features and more for the 2730 Combination Ripper Primary Tillage.
- Adjust depth in six seconds on the go
- In-cab control of each functional area
- 1/10th-in. (2.5-mm) accuracy
- Expanded tractor compatibility
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Tillage
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Working width | Option 1: 4.3 m 14 ft Option 2: 5.5 m 18 ft Option 3: 5.5 m Option 4: 6.7 m 22 ft Option 5: 7.9 m 26 ft |
| Transport width | Option 1: Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft Option 2: Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m 22.5 ft Option 3: Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft Option 4: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft Option 5: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m 18.3 ft |
| Maximum operating depth | 40.6 cm 16 in. |
| Operating speed | 8-11.3 km/h 5-7 mph |
| Horsepower required per standard | 25.1-41 kW 34-55 hp |
| Standards | Spacing 61 cm 24 in. |
| Tool: | |
| Configuration | Disk - Disk - Ripper - Closing Disk - Finishing Attachment |
| Option 1 | Rigid 7-standard on spacing of 61 cm 24 in. |
| Option 2 | Rigid 9-standard on spacing of 61 cm 24 in. |
| Option 3 | Folding 9-standard on spacing of 61 cm 24 in. |
| Option 4 | Folding 11-standard on spacing of 61 cm 24 in. |
| Option 5 | Folding 13-standard on spacing of 61 cm 24 in. |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Working width: | |
| Option 1 | 4.3 m 14 ft |
| Option 2 | 5.5 m 18 ft |
| Option 3 | 5.5 m 18 ft |
| Option 4 | 6.7 m 22 ft |
| Option 5 | 7.9 m 26 ft |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Transport width: | |
| Option 1 | Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft |
| Option 2 | Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m |
| Option 3 | Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft |
| Option 4 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft |
| Option 5 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Depth: | |
| Maximum operating depth | 40.6 cm 16 in. |
| Transport clearance: | |
| Standard | 33 cm 13 in. |
| Underframe clearance: | |
| Maximum | 95.25 cm 37.5 in. |
| Speed: | |
| Operating speed | 8-11.3 km/h 5-7 mph |
| Horsepower: | |
| Horsepower required per standard | 25.1-41 kW 34-55 hp |
| Depth control: | |
| Option 1 | Single-point crank |
| Option 2 | TruSet™ tillage |
| Hydraulics: | |
| Option 1 | 4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Option 2 | 5 SCVs (depth control, front disk, rear conditioner, wing fold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
| Hitch: | |
| Design | Single tube |
| Fore-aft adjustment | Hitch turnbuckle |
| Standards: | |
| Spacing | 61 cm 24 in. |
| Frame cross section | |
| Standards, Option 1: | |
| Trip force | Cushion-trip standard: 1,859.7 kg 4,100 lb |
| Trip height | Shear bolt protected above: 33 cm 13 in. |
| Type | Parabolic with or without wear shins, straight with wear shins |
| Standards, Option 2: | |
| Trip force | |
| Trip height | |
| Type | |
| Standards, Option 3: | |
| Trip force | |
| Trip height | |
| Type | |
| Ground engaging components: | |
| Type | Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
| Coverboards | On parabolic standards: 10.2 cm 4 in. 15.2 cm 6 in. 20.3 cm 8 in. |
| Wear shin | |
| Mulching disk components: | |
| Description | X-type configuration at front of tool |
| Depth control | TruSet in-cab controls Single-point depth control |
| Maximum depth | 20.3 cm 8 in. |
| Type of standard | C-spring |
| Base equipment blades | Solid spherical low-concavity disk blades: 660x6 mm 26x0.25 in. |
| Blade spacing | Individual: 45.7 cm 18 in. Effective - 22.9 cm 9 in. Disk gang: 27.9 cm 11 in. Effective: 14 cm 5.5 in. |
| Front frame angle | Fixed: 18 degree (angle) |
| Rear frame angle | Fixed: 18 degree (angle) |
| Spools | |
| Bearings | Sealed, maintenance-free |
| Scraper | Heavy-duty floating combination scraper (base option) |
| Rear conditioner: | |
| Description | Solid-spherical low concavity closing disks (notched optional) |
| Adjustments | TruSet in-cab controls Mechanical |
| Base equipment blades | Individual dual mount: 45.7 cm 18 in. |
| Bearings | Sealed, maintenance-free |
| Type of standard | |
| Wheels: | |
| Type | Tandem walk-over wheels |
| Rear hitch: | |
| Type | |
| Approximate weight: | |
| Option 1 | |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Option 6 | |
| Option 7 | |
| Option 8 | |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Additional Features: | |
| Option 1 | Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket Coil-tine harrow |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Option 5 | |
| Additional information: | |
| Date collected | |
| Tires: | |
| Type |