320R LOADER

Front End Loaders For Tractors

Compatible with 3R Series Tractors
Quik-Park mounting system for efficient attachment and removal
Quik-Change attachment carrier makes it easier and faster to move from chore to chore
1,122 pounds (509 kg) lift capacity

Starting At:
$7,200

Features

Quik-Park loader mounting system

Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

Quick-change attachment carrier

Allows fast, easy removal and mounting of attachments without tools.

Close up of grease fitting

Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Specs & Compare

ADD MODEL

Key Specs	Current Model
Maximum lift height (A)	2616 mm 103.3 in.
Lift capacity at full height	Measured at pivot (U) 633 kgf 1393 lbf Measured at 500 mm ahead of pivot (V) 457 kgf 1005 lbf
Boom breakout force	Measured at pivot (Y) 1710 kgf 3769 lbf Measured at 500 mm ahead of pivot (Z) 1209 kgf 2665 lbf
Bucket rollback force capacity	At ground-level line (ZZ) 1335.4 kgf 2944 lbf
Clearance at full height - bucket dumped (C)	2003 kgf 78.8 lbf
Dump angle, degrees (E)	49.3 degree (angle)
Rollback angle, degrees (G)	23.8 degree (angle)
Tractor
Model	4105
Front tire	10-16.5 6PR R4T1
Rear tire	17.52-24 8PR R4T1
Front axle configuration
Wheelbase	1727 mm 68 in.
Pump capacity	5.7 gpm
Rated pressure	2500 psi
Loader
Base weight	281.09 kg
Leveling configuration
Bucket used	Materials
Bucket weight	93.8 kg 207 lb
Lift capacity at full height	Measured at pivot (U) 633 kgf 1393 lbf Measured at 500 mm ahead of pivot (V) 457 kgf 1005 lbf
Lift capacity at 59 in. (1500 mm)	Measured at pivot (W) 959 kgf 2109 lbf Measured at 500 mm ahead of pivot (X) 745 kgf 1639 lbf
Boom breakout force	Measured at pivot (Y) 1710 kgf 3769 lbf Measured at 500 mm ahead of pivot (Z) 1209 kgf 2665 lbf
Bucket rollback force capacity	At maximum height (VV) 822 kgf 1819 lbf At 59-in. (1500-mm) lift height (XX) 1397 kgf 3079 lbf At ground-level line (ZZ) 1335.4 kgf 2944 lbf
Dimensions	Maximum lift height (A) 2616 mm 103.3 in. At full height - bucket level(B) 2411 mm 94.9 in. At full height - bucket dumped (C) 2003 mm 78.8 in.
Overall length (I+F), ft (m)	3.218 m 10.55 ft
Overall height in carry position (J)
Digging depth (H)	121 mm 4.76 in.
Reach	At maximum height (D) 766 mm 30.1 in. At ground level - bucket level (F) 1491 mm 50.7 in.
Bucket angle	Dump angle, degrees (E) 49.3 degree (angle) Rollback angle, degrees (G) 23.8 degree (angle) Dump angle, ground 138 degree (angle)
Cycle times	Loader raise, seconds 3.6 seconds Loader lower, seconds 2.1 seconds Bucket dump, seconds 3.0 / 1.2 (with regen) seconds Bucket rollback, seconds 1.8 seconds
Additional information
Date collected

Performance Edge

Whether you rely on your equipment for weekend lawn care or run a full-scale landscaping business, we have maintenance plans that fit your needs. Our team proudly serves customers throughout Ohio and Indiana, ensuring their mowers, tractors, and outdoor power equipment remain in top working condition.

Services Include

Pick-up and delivery
Engine oil & filter change
Lubricate mower and mower deck
Fuel filter, spark plug & air filter placement
Sharpen and balance mower blades
Check & correct belt tension
An ADDITIONAL YEAR OF WARRANTY* exclusive to 4-year plan

Adjust tire pressure
Check charging and safety systems
Check transmission oil & filter
Clean out underside of mower deck
Clean deck wheels & rollers
Power wash & detail entire unit

320R LOADER Front End Loaders For Tractor FAQs

Which tractors does the John Deere 320R loader fit?

The 320R loader is compatible with John Deere 3R Series tractors. Our team can confirm the fit for your tractor before you order.

How high does the John Deere 320R loader lift?

The spec sheet lists a 103.3 in. maximum lift height, 94.9 in. at full height with the bucket level and 78.8 in. of clearance with the bucket dumped. Those figures are measured on a 4105 tractor.

How do I take the John Deere 320R loader off my tractor?

The 320R uses the Quik-Park mounting system, so you can remove and mount the loader without tools. Once the latches are open, the parking stand lowers into position as you move the joystick, and the loader moves to the parked position.

How fast can I change attachments on the John Deere 320R?

The Quik-Change attachment carrier lets you remove and mount attachments without tools, so moving from chore to chore is quicker.

Is the John Deere 320R loader easy to grease?

Yes. Every pivot point has a grease fitting you can reach from the side of the loader, and there is enough room to rotate the grease gun tip off each fitting.

Where can I buy genuine parts for my John Deere 320R?

You can shop genuine John Deere 320R loader parts on Koenig Marketplace, including hydraulic parts, ground engaging parts and tractor implement parts. Choose same-day delivery from a nearby Koenig store or pick up in store. Our trained technicians across Ohio and Indiana can also handle your 320R's loader maintenance and repairs.