300E LOADER

Front End Loaders For Tractors

Compatible with 3025D, 3035D, 3043D, 3025E, 3032E, and 3038E
Curved boom design improves operator visibility to front implements
Larger knee plates for strength and durability without sacrificing compact stance
845 lbs (384 kg) of lift capacity
Mechanical Self-Leveling (MSL) Loader option with 1,283 lb (583 kg) lift capacity

Starting At:
$5,500

Features

Quickly Take Your Loader Skills to the Next Level

The Mechanical Self-Leveling (MSL) loader provides steady control whether you're new to loader work or a seasoned operator. This option is available for 1 Family, 2 Family, 3D, 3E, 4M Heavy Duty, and 4R Tractors.

What you will like about a MSL loader

Effortless Control at Every Height: The loader implement maintains its position throughout lifting and lowering, minimizing the need for constant manual adjustments.
Increased lift capacity: MSL loaders handle heavier loads than NSL models, enhancing efficiency and reducing the number of trips needed to get the job done.
Reduced material loss: Maintain a stable bucket position during lifting and transport to keep more material where it belongs— minimizing waste and cleanup.
Enhanced visibility: A right-hand bucket level indicator makes it easy to monitor implement position at a glance.

As the first MSL loader of its kind for Compact Utility Tractors in North America, this innovation makes loader tasks faster, easier, and more efficient—no matter your experience level.

300E MSL Loader

Leveling linkage on top of boom and flag pins used in pivot

300E MSL Loader

End-of-pin lubrication

Closeup of grease fitting

Grease points

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as a sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Quick-change attachment carrier

Quick-change attachment

The quick-change attachment carrier allows for fast, easy removal and mounting of attachments without tools.

With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.

Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.

Instructions for attaching the loader

Instructions for detaching the loader

The kit includes the following:

Parking stands
Handled pins
Hydraulic hoses
Quick-couplers
Mounting bracket and hardware

Parking stand installed

Quick disconnect connected

Boom pins installed

Specs & Compare

ADD MODEL

Key Specs	Current Model
Maximum lift height (A)	2140 mm 84 in.
Lift capacity at full height	Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb
Boom breakout force	Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb
Bucket rollback force capacity	At ground-level line (ZZ) 634 kg 1422 lb
Clearance at full height - bucket dumped (C)	1596 mm 63 in.
Dump angle, degrees (E)	43.8 degree (angle)
Rollback angle, degrees (G)	31.4 degree (angle)
Tractor
Model	3025E, 3032E, 3038E
Front tire	25x8.50-14 4PR R4
Rear tire	15.00-19.5 4PR
Front axle configuration
Wheelbase	1595 mm 62.8 in.
Pump capacity	5.3 gpm
Rated pressure	2495 psi
Loader
Base weight	306.4 kg
Leveling configuration
Bucket used	Materials - 1550 mm
Bucket weight	93 kg 205 lb
Lift capacity at full height	Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb
Lift capacity at 59 in. (1500 mm)	Measured at pivot (W) 588 kg 1294 lb Measured at 500 mm ahead of pivot (X) 444 kg 977 lb
Boom breakout force	Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb
Bucket rollback force capacity	At maximum height (VV) 639 kg 1433 lb At 59-in. (1500-mm) lift height (XX) 809 kg 1814 lb At ground-level line (ZZ) 634 kg 1422 lb
Dimensions	Maximum lift height (A) 2140 mm 84 in. At full height - bucket level(B) 1979 mm 78 in. At full height - bucket dumped (C) 1596 mm 63 in.
Overall length (I+F), ft (m)	2.9 m 9.5 ft
Overall height in carry position (J)	161 mm 6 in.
Digging depth (H)	131 mm 5 in.
Reach	At maximum height (D) 603 mm 24 in. At ground level - bucket level (F) 1369 mm 54 in.
Bucket angle	Dump angle, degrees (E) 43.8 degree (angle) Rollback angle, degrees (G) 31.4 degree (angle) Dump angle, ground 122 degree (angle)
Cycle times	Loader raise, seconds 3.31 seconds Loader lower, seconds 2.75 seconds Bucket dump, seconds 1.75 seconds Bucket rollback, seconds 1.88 seconds
Additional information
Date collected

Performance Edge

Whether you rely on your equipment for weekend lawn care or run a full-scale landscaping business, we have maintenance plans that fit your needs. Our team proudly serves customers throughout Ohio and Indiana, ensuring their mowers, tractors, and outdoor power equipment remain in top working condition.

Services Include

Pick-up and delivery
Engine oil & filter change
Lubricate mower and mower deck
Fuel filter, spark plug & air filter placement
Sharpen and balance mower blades
Check & correct belt tension
An ADDITIONAL YEAR OF WARRANTY* exclusive to 4-year plan

Adjust tire pressure
Check charging and safety systems
Check transmission oil & filter
Clean out underside of mower deck
Clean deck wheels & rollers
Power wash & detail entire unit

300E LOADER Front End Loaders For Tractor FAQs

Which tractors does the John Deere 300E loader fit?

The 300E loader is compatible with the John Deere 3025D, 3035D, 3043D, 3025E, 3032E and 3038E tractors.

How much can the John Deere 300E loader lift?

The 300E has 845 lb of lift capacity, measured 500 mm ahead of the pivot at its 84 in. full lift height. The optional Mechanical Self-Leveling (MSL) version raises lift capacity to 1,283 lb.

What is the Mechanical Self-Leveling option on the John Deere 300E loader?

The MSL option keeps the bucket or implement level as you lift and lower, so you make fewer manual adjustments and lose less material. A right-hand bucket level indicator lets you check implement position at a glance.

Is the John Deere 300E loader easy to remove from the tractor?

Yes. With the BW15872 parking stand kit, the 300E can be removed from the tractor quickly without tools. A quick-change attachment carrier lets you swap attachments without tools too.

Where can I buy genuine parts for my John Deere 300E loader?

You can shop genuine John Deere 300E loader parts on Koenig Marketplace, including hydraulic parts, ground engaging parts and hardware. Choose same-day delivery from a nearby Koenig store or pick up in store. Our trained technicians across Ohio and Indiana can also handle your 300E's loader maintenance and repairs.

How do I maintain the John Deere 300E loader?

All pivot points have grease fittings that you can reach from the side of the loader, so none are hard to find. Our parts and service teams can help with anything else your loader needs.

300E LOADER

Front End Loaders For Tractors

More Productivity and Less Material Loss with the Optional Mechanical Self-Leveling (MSL) Loader

Quickly Take Your Loader Skills to the Next Level

What you will like about a MSL loader

End-of-pin lubrication - Easy maintenance

Quick-change attachment carrier

Parking stand kit

Specs & Compare

Key Specs

Tractor

Loader

Additional information