john deere mt7 minimum till ripper mt7 minimum till ripper

MT7 MINIMUM TILL RIPPER

Mt7 Minimum Till Ripper

7 standards
Two stabilizer wheels
Integral or drawn options*
Extended wear standards deliver twice the life expectancy*

Features

Specs & Compare

Key Specs	Current Model
Working width	5.3 m 17.5 ft
Transport width	5.3 m 17.25 ft
Operating depth	Maximum 40.6 cm 16 in.
Miles per hour	6.4-11.2 km/h 4-7 mph
Horsepower per standard	29.8-44.7 kW 40-60 hp
Spacing between standards	76.2 cm 30 in.
Tool configuration
Type	In-line ripper
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Working width
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Transport width
Option 1
Option 2
Option 3
Option 4
Option 5
Option 6
Option 7
Option 8
Option 9
Option 10
Option 11
Option 12
Option 13
Option 14
Option 15
Option 16
Option 17
Option 18
Option 19
Option 20
Option 21
Option 22
Operating depth
Maximum	40.6 cm 16 in.
Frame
Size	102x152x0.9.5 mm 4x6x0.375 in.
Maximum underframe clearance	89 cm 35 in.
Operating speed
Miles per hour	6.4-11.2 km/h 4-7 mph
Horsepower required
Horsepower per standard	29.8-44.7 kW 40-60 hp
Depth control
Option 1	3-point hitch for integral
Option 2	TruSet™ in-cab controls and single-point crank-adjust (on drawn models only)
Option 3
Hydraulic requirements
Option 1
Option 2
Hitch
Options	Integral Optional: Drawn
Three-point hitch requirements	Category 3/4 (with Quik-Coupler)
Pull-type description	Category 4 Hitch
Standard options
Spacing between standards	76.2 cm 30 in.
Option 1	Trip force Shear-bolt: 3,265 kg 7,200 lb Standard type Straight with wear shin: 19 or 31.75 mm 0.75 or 1.25 in. Shear-bolt
Option 2	Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip
Option 3
Option 4
Ground-engaging components
Options	Standard: 19 mm (0.75 in.) min-till point: 178 mm (7 in.) low-disturbance: 178 mm (7 in.), 254 mm (10 in.) ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.) Regular: 57 mm (2.25 in.) Capped: 57 mm (2.25 in.) Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.)
Coulters
Description
Type	Spring cushion coulters
Pounds of force	Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in.
Blades	Straight or rippled: 559x4.5 mm 22x0.1777 in.
Closing wheel attachment
Description
Down force	113.4 kg 250 lb
Size	10.2x40.6 cm 4x16 in.
Spacing	19.05 to 35.6 cm 7.5 to 14 in.
Angle adjustments	1 to 15 degree (angle)
Stabilizer/gauge wheels
Type	Two Stabilizer wheels
Wheels	52.1x20.3 cm 20.5x8 in.
Tires	10 PR
Pull-type wheels
Description	VF280/70R15 Radial tire (with drawn hitch)
Additional feature
Option 1
Option 2
Option 3
Option 4
Additional information
Date collected

MT7 MINIMUM TILL RIPPER Mt7 Minimum Till Ripper FAQs

How big is the John Deere MT7 minimum till ripper?

The MT7 has 7 standards spaced 30 in. apart for a 17.5 ft working width and a 17.25 ft transport width. It rips up to 16 in. deep and has 35 in. of maximum underframe clearance.

How much horsepower does the John Deere MT7 ripper need?

Plan on 40 to 60 hp per standard. The recommended working speed is 4 to 7 mph.

Is the John Deere MT7 available as an integral or drawn ripper?

Both. The integral model mounts to a Category 3/4 three-point hitch with a Quik-Coupler and sets depth with the hitch, while the drawn model uses a Category 4 hitch, VF280/70R15 radial tires, TruSet in-cab depth control and single-point crank adjustment. Two stabilizer wheels are standard.

What points and standards can I run on the John Deere MT7?

The MT7 uses straight standards with a wear shin in 0.75 or 1.25 in. sizes and shear-bolt protection. Point choices include 7 in. min-till points, 7 or 10 in. low-disturbance points, 2.5 in. ultra-low-disturbance points and LaserRip points in 2.75, 5 and 7 in. widths.

Can the John Deere MT7 be equipped with coulters and closing wheels?

Yes. Spring cushion coulters with 22 in. straight or rippled blades run at a 600 lb normal working load. A closing wheel attachment adds 250 lb of down force, with spacing adjustable from 7.5 to 14 in.

Where can I buy genuine parts for my John Deere MT7?

You can shop genuine John Deere MT7 parts on Koenig Marketplace, including ground engaging parts, tractor implement parts and wheels, tires and tracks. Choose same-day delivery from a nearby Koenig store or pick up in store. Our trained technicians across Ohio and Indiana can also handle your MT7's seasonal maintenance and repairs.

Related Products

mt11 minimum till ripper

mt9 minimum till ripper

MT7 MINIMUM TILL RIPPER

Mt7 Minimum Till Ripper

Specs & Compare

Key Specs

Tool configuration

Working width

Transport width

Operating depth

Frame

Operating speed

Horsepower required

Depth control

Hydraulic requirements

Hitch

Standard options

Ground-engaging components

Coulters

Closing wheel attachment

Stabilizer/gauge wheels

Pull-type wheels

Additional information