2100 Minimum Till Ripper Primary Tillage from John Deere. Learn more about the features and more for the 2100 Minimum Till Ripper Primary Tillage.
- Variety of working widths available
- Mainframe extensions
- Setback brackets for staggered standard pattern
- 3/4-in. straight shear-bolt standard minimizes soil and residue disturbance
Call Us
- Anna, Ohio937-693-2221
- Franklin, Indiana317-738-2250
- Greenfield, Indiana317-462-5585
- Greensburg, Indiana812-663-5992
- Greenville, Ohio937-548-1151
- Oxford, Ohio513-523-4169
- Richmond, Indiana765-962-7330
- Rushville, Indiana765-932-2977
- Urbana, Ohio937-653-5281
Manufacturer
John Deere
Category
Tillage
Location
Anna, Ohio
Franklin, Indiana
Greenfield, Indiana
Greensburg, Indiana
Greenville, Ohio
Oxford, Ohio
Richmond, Indiana
Rushville, Indiana
Urbana, Ohio
Specs
| Key Specs: | |
|---|---|
| Working width | 2.3 m 7.5 ft 2.7 m 9 ft 3.05 m 10 ft 3.8 m 12.5 ft 4.6 m 15 ft 5.3 m 17.5 ft 6.8 m 22.5 ft |
| Transport width | 3.05 m 10 ft 4.1 m 13.5 ft 5 m 16.5 ft 6.7 m 22 ft 4.7 m 15.5 ft |
| Operating depth | Maximum 40.6 cm 16 in. |
| Miles per hour | 6.4-8 km/h 4-5 mph |
| Horsepower per standard | 22.3-29.8 kW 30-40 hp Depending on soil type, moisture, and depth of operation NOTE: Maximum compatible tractor engine - 231.2 kW 310 hp |
| Spacings | 76.2 cm 30 in. 91.4 cm 36 in. |
| Tool configuration: | |
| Type | In-line ripper |
| Option 1 | Standard: 3, spacing: 76.2 cm 30 in. |
| Option 2 | Standard: 3, spacing: 91.4 cm 36 in. |
| Option 3 | Standard: 4, spacing: 76.2 cm 30 in. |
| Option 4 | Standard: 5, spacing: 76.2 cm 30 in. |
| Option 5 | Standard: 5, spacing: 91.4 cm 36 in. |
| Option 6 | Standard: 7, spacing: 76.2 cm 30 in. |
| Option 7 | Standard: 9, spacing: 76.2 cm 30 in. Rigid |
| Option 8 | Standard: 9, spacing: 76.2 cm 30 in. Folding |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
| Working width: | |
| Option 1 | 2.3 m 7.5 ft |
| Option 2 | 2.7 m 9 ft |
| Option 3 | 3.05 m 10 ft |
| Option 4 | 3.8 m 12.5 ft |
| Option 5 | 4.6 m 15 ft |
| Option 6 | 5.3 m 17.5 ft |
| Option 7 | 6.8 m 22.5 ft |
| Option 8 | 6.8 m 22.5 ft |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
| Transport width: | |
| Option 1 | 3.05 m 10 ft |
| Option 2 | 3.05 m 10 ft |
| Option 3 | 3.05 m 10 ft |
| Option 4 | 4.1 m 13.5 ft |
| Option 5 | 4.1 m 13.5 ft |
| Option 6 | 5 m 16.5 ft |
| Option 7 | 6.7 m 22 ft |
| Option 8 | 4.7 m 15.5 ft |
| Option 9 | |
| Option 10 | |
| Option 11 | |
| Option 12 | |
| Option 13 | |
| Option 14 | |
| Option 15 | |
| Option 16 | |
| Option 17 | |
| Option 18 | |
| Option 19 | |
| Option 20 | |
| Option 21 | |
| Option 22 | |
| Operating depth: | |
| Maximum | 40.6 cm 16 in. |
| Frame: | |
| Size | 102x152x0.9.5 mm 4x6x0.375 in. 9 standard: 152x152x9.5 mm 6x6x0.35 in. |
| Maximum underframe clearance | 89 cm 35 in. |
| Operating speed: | |
| Miles per hour | 6.4-8 km/h 4-5 mph |
| Horsepower required: | |
| Horsepower per standard | 22.3-29.8 kW 30-40 hp Depending on soil type, moisture, and depth of operation NOTE: Maximum compatible tractor engine - 231.2 kW 310 hp |
| Depth control: | |
| Option 1 | 3-point hitch for integral |
| Option 2 | Single point for pull-type |
| Option 3 | |
| Hydraulic requirements: | |
| Option 1 | Pull type: 1 SCV (lift) at 17,237 kPa 2500 psi for optimum raise times |
| Option 2 | Low transport: 1 SCV (fold) at 17,237 kPa 2,500 psi for optimum raise times |
| Hitch: | |
| Options | Integral, or 7- or 9-standard pull type |
| Three-point hitch requirements | Category 2, Category 3 and 3N (with Quik-Coupler) |
| Pull-type description | Level Lift |
| Standard options: | |
| Spacings | 76.2 cm 30 in. 91.4 cm 36 in. |
| Option 1 | Trip force Shear bolt: 3,265.9 kg 7,200 lb Standard type 19 mm 0.75 in. or 31.75 mm 1.25 in. Straight with wear shin Shear-bolt |
| Option 2 | Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip |
| Option 3 | |
| Option 4 | |
| Ground-engaging components: | |
| Options | Standard: 19 mm (0.75 in.), min-till point: 178 mm (7 in.), low-disturbance: 254 mm (10 in.), ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.), Regular: 57 mm (2.25 in.), Capped: 57 mm (2.25 in.), Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.) |
| Coulters: | |
| Description | |
| Type | Spring cushion coulters |
| Pounds of force | Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in. |
| Blades | Straight or rippled: 559x4.5 mm 22x0.177 in. |
| Closing wheel attachment: | |
| Description | Two adjustable wheels on 3-, 4-, 5- and 7-standard sizes. Four adjustable wheels on 9-standard integral only. Drawn hitch machines do not require stabilizer wheels. |
| Down force | 113.4 kg 250 lb |
| Size | 10.2x40.6 cm 4x16 in. |
| Spacing | 19.05 to 35.6 cm 7.5 to 14 in. |
| Angle adjustments | 0 to 15 degree (angle) |
| Stabilizer/gauge wheels: | |
| Type | Stabilizer wheels |
| Wheels | 52.1x20.3 cm 20.5x8 in. |
| Tires | 10 PR |
| Pull-type wheels: | |
| Description | 12.5L-15 tires for 9-standard pull-type; 11L-15 tires for 7-standard, pull-type; 9-standard has 8-bolt hubs and spindles |
| Additional feature | Replaceable wear shin |
| Option 1 | Set back brackets |
| Option 2 | |
| Option 3 | |
| Option 4 | |
| Additional information: | |
| Date collected |